Motor running... sorta

I have my test motor running in simple trapezoidal commutation, next is FOV control.

Electronics work

I have the firmware in a position where to continue I need to actually hook up the electronics and try turning a motor, so I started mounting my control box to the master honda electronics.
In order to do this I had to make sure any loose ends were tied up, I found the DC-DC converter didn't have the correct inputs from my electronics. I had to experiment with powering up the DC-DC converter which eventually I got working. It required a +12 feed from the ignition, high voltage input and the last thing is a 12 volt lead acid battery which has to be hooked to the output of the DC-DC converter for it to function.